Functional Introduction
The wind turbine yaw training platform includes a yaw actuator, a yaw control cabinet, a yaw console, etc. The yaw actuator consists of a yaw base, a yaw bearing, a yaw hydraulic brake and its pipelines, a yaw motor and brake, a reducer, a cable twist limit sensor, etc. The yaw control cabinet mainly includes a yaw controller, a yaw driver, a motor protector, a safety relay, a DC power supply, an overcurrent and leakage protector, etc. The human-machine interface of the console serves as the human-machine interaction system and the trainee terminal of the training assessment system. A yaw system control panel is set on the console, which can set the yaw mode, manual yaw, wind direction, monitor yaw status indicators, etc.

Training Programs   
◎Yaw control failure                         ◎Wind vane signal loss                                   ◎Yaw motor 1 circuit disconnection

◎Yaw soft start failure                      ◎Hydraulic station circuit disconnection        ◎Yaw motor 2 circuit disconnection

◎Yaw main circuit disconnection     ◎Hydraulic station motor disconnection        ◎Clockwise yaw control failure

◎Yaw motor circuit disconnection   ◎Hydraulic signal loss of hydraulic station     ◎Counterclockwise yaw control failure

◎Clockwise yaw limit failure            ◎Counterclockwise yaw limit failure                ◎Clockwise yaw safety chain failure

◎Counterclockwise yaw safety chain failure

Specifications and Parameters
◎Environmental conditions: Laboratory environment                 ◎Overall dimensions: 1000×3200mm

◎Control cabinet dimensions: 2200×800×600mm                      ◎Ambient temperature: -10℃~+50℃

◎Power supply: 380V±10%, 50Hz±1%